Linmk2 doesn't have a personal statement currently.
Gender Not Set
Port Arthur, Texas
Weather, Computers, Classic Cars
Joined: 7-March 04
Profile Views: 6,403*
Last Seen: 28th July 2015 - 06:35 PM
Local Time: Feb 25 2017, 09:40 PM
68 posts (0 per day)
* Profile views updated each hour
26 Jul 2014
Well, after many years my Vantage Pro 1 has died. It has been a sturdy device. It fell off the roof once, been through two major hurricanes and continued to function. Last week the portions of the console display started to pixelate and slowly the entire screen just scrabbled. I replaced the batteries, but that did nothing. Anyway, I got my money's worth out of my VP1. Hopefully, the VP2 I just ordered will deliver the same long term service.
23 Dec 2007
Well, I bet Santa is polishing up his sleigh, checking his list (I hope all you guys/gals are on his "good" list) one final time, and briefing all the reindeer on world wide weather conditions with the help of Accuweather of course. To everybody, may I extend the warmest holiday greetings to you and your families. May all of your Christmas dreams come true.
16 Sep 2007
Yesterday, I replaced my bent antenna mast damaged on Thursday morning by surprise Hurricane Humberto :shock: . Like Hurricane Rita before it, the mast seemed to fail at winds above 60 MPH. Rita was 65, Humberto 62. My VP1 is mounted atop the mast. Anyway, this is the first time in more than six months I've had my VP1 down for any reason. During my inspection of the unit, I noticed that the covering over the solar cells have large fractures. Some, were very deep, they appeared to be exposing the actual cell. Have any VP1 owners notice this on their units? Any guess as to when the cell might fail, if at all?
3 Mar 2007
My VP 1 stopped transmitting during the nighttime hours. It was determined that the SIM board was "shot". Since that part is no longer serviced, I purchased a retro fit kit and installed it in November, 2006. Everything was working fine until we recently had two days of intense fog. The humidity reading was 100%, as it should. However, once we started to dry out so to speak, the reading was still 100%. According to the local NSW office in the days following the fog, the readings were in the upper 30's. For about 48 hours the reading on my VP was 100%! I emailed Davis. They advised me that the unit had a 90 day warranty and to call them to arrange for a new part. Since I received the email at work, I waited to get home to call. Lo and behold, when I got home, the readings seem fine. Anyone else have this problem? I don't want to lose out on my warranty coverage, but getting to the station is somewhat of a pain, since it's on my roof. Should I assume everything is OK, or go for the replacement? I don't want to replace something, and find out there is nothing wrong with it and get charged once Davis looks at the return part. As always, thanks guys.
26 Oct 2006
I ordered and received a retro fit kit for my "sick" VP 1, which I plan to install this upcoming weekend. I do have a few questions for those that may have already done the upgrade. I'm concerned that the wires from the solar panel and rain collector are not long enough to fit to the new location of the SIM board. As I recall, there does not seem to be a lot of wire with these two items. Perhaps I'm mistaken, but I don't think the wire is long enough to run down the side of the aspirators plates and under the bottom plate. Is there? Just what is the correct routing of those wires. The instructions are not very clear. Thanks
24 Mar 2014 - 14:49
9 Aug 2009 - 11:01
21 May 2009 - 10:46
28 Jan 2008 - 22:58
Other users have left no comments for Linmk2.
There are no friends to display.
|Lo-Fi Version||Time is now: 25th February 2017 - 04:40 PM|